Product ID:Y430 WONDER-TONES INTERIOR LATEX FLAT WALL PAINT
MSDS Date:11/20/1987
FSC:8010
NIIN:00F032714
MSDS Number: BTBCG

AMERITONE PAINT CORP

18414 S SANTA FE AVE
COMPTON, CA 90221
US

Emergency Phone: 213-639-6791

Info Phone: 213-639-6791

Cage: FO133

AMERITONE PAINT CORP/COMPTON, CA 90221

190 LONG BEACH, CA 90801 US

Telephone: 310-639-6791

Cage: FO133

DIATOMACEOUS EARTH, FLUX-CALCINED, NATURAL, SILICA,

CAS: 68855-54-9

Fraction By Weight: <5%

CLAY (KAOLIN), ALUMINUM SILICATE

CAS: 1332-58-7

RTECS: GF1670500

Fraction By Weight: <5-10%

ACGIH TLV: 10 MG/CUM TOTAL DUST

TITANIUM DIOXIDE, TIO2

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: <5-15%

OSHA PEL 15 MG/CUM

ACGIH TLV: 10 MG/CUM (DUST)

PROPANOIC ACID, 2-METHYL, MONOESTER

CAS: 25265-77-4

RTECS: UF6000000

Fraction By Weight: <5%

AMMONIUM HYDROXIDE, AQUA AMMONIA

CAS: 1336-21-6

RTECS: BQ9625000

Fraction By Weight: <1%

ACGIH TLV: 25 PPM

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

ATTAPULGITE CLAY, HYDROUS MAGNESIUM ALUMINUM SILICATE

CAS: 12174-11-7

RTECS: RT6400000

Fraction By Weight: <5%

SILICA DIOXIDE, CRYSTALLINE QUARTZ, SAND (SUSPECTED HUMAN

CAS: 14808-60-7

RTECS: VV7330000

Fraction By Weight: <5-15%

ACGIH TLV: 0.1 MG/CUM RESP DUST

10.6-11.20

RTECS: 9999999WG

188-233 G/L

RTECS: 9999999VO

NAPHTHA PETROLEUM, HEAVY ALKYLATE C9-C12 BOILING PT

CAS: 64741-65-7

Fraction By Weight: <1%

OSHA PEL 500 PPM

ACGIH TLV: 100 PPM

ETHYLENE GLYCOL, GLYCOL

CAS: 107-21-1

RTECS: KW2975000

Fraction By Weight: <5%

ACGIH TLV: C 127 MG/CUM

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

CHLOROTHALONIL; TETRACHLOROISOPHTHALONITRILE; DACONIL;

CAS: 1897-45-6

RTECS: NT2600000

Fraction By Weight: <1%

Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:YES IARC:YES OSHA:NO
Health Hazards Acute and Chronic:INHALATION: RESPIRATORY TRACT
IRRITATION. SKIN/EYES: IRRITATION. PROLONGED & REPEATED INHALATION
OF SPRAY MIST &/OR SANDING DUST OVER A PERIOD OF YEARS MAY CAUSE
DUST DISEASE OF THE LUNGS.
Explanation of Carcinogenicity:SEE INGREDIENTS
Effects of Overexposure:INHALATION: HEADACHE, NAUSEA, DIZZINESS.
SKIN/EYES: IRRITATION.

First Aid:INHALATION: REMOVE TO FRESH AIR. EYES: FLUSH IMMEDIATELY
W/PLENTY OF WATER FOR AT LEAST 15 MINS. SKIN: REMOVE W/SOAP &
WATER. REMOVE SOILED CLOTHING. INGESTION: DRINK 1 OR 2 GLASSES OF
WATER TO DILUTE . DON'T INDUCE VOMITING. TREAT SYMPTOMATICALLY.
OBTAIN MEDICAL ATTENTION IN ALL CASES.

Flash Point:NONE
Extinguishing Media:CO2, DRY CHEMICAL, FOAM OR OTHER NFPA APPROVED
METHOD FOR TREATING A CLASS B FIRE.
Fire Fighting Procedures:USE FULL PROTECTIVE EQUIPMENT & SCBA. WATER
SPRAY MAY BE INEFFECTIVE. IF WATER IS USED, FOG NOZZLES ARE
PREFERABLE. USE WATER TO COOL FIRE EXPOSED CONTAINERS.
Unusual Fire/Explosion Hazard:DUE TO PRESSURE BUILD UP, CLOSED
CONTAINERS EXPOSED TO EXTREME HEAT MAY EXPLODE.

Spill Release Procedures:WASH W/WATER. CONTAIN SPILLED MATERIAL &
REMOVE WITH INERT ABSORBENT. STORE IN CLOSED CONTAINER UNTIL
PROPERLY DISPOSED OF.

Handling and Storage Precautions:STORE <110F & KEEP FROM FREEZING. KEEP
CONTAINER CLOSED WHEN NOT IN USE. DON'T REUSE EMPTY CONINERS. DON'T
TRANSFER TO BOTTLES OR UNMARKED CONTAINERS.
Other Precautions:KEEP OUT OF REACH OF CHILDREN. DON'T GET IN EYES OR
BREATHE VAPORS, SPRAY MIST OR SANDING DUST.

Respiratory Protection:WHEN SPRAY APPLIED IN OUTDOOR OR OPEN AREAS
W/UNRESTRICTED VENTILATION & DURING SANDING/GRINDING OPERATIONS,
USE A NIOSH/MSHA MECHANICAL FILTER RESPIRATOR. IN RESTRICTED
VENTILATIONS AREAS, USE A NIOS H/MSHA CHEMICAL/MECHANICAL FILTERS.
SUPP
Ventilation:PROVIDE GENERAL DILUTION OR LOCAL EXHAUST VENTILATION IN
VOLUME & PATTERN TO KEEP CONCENTRATIONS BELOW TLV.
Eye Protection:SAFETY GLASSES W/SPLASH GUARD/SIDESHIELD
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE. WASH HANDS BEFORE EATING, SMOKING OR USING THE WASHROOM.
Supplemental Safety and Health
CON'T: WHEN USED IN CONFINED AREAS, USE A NIOSH/MSHA APPROVED AIR
SUPPLY RESPIRATOR OR HOOD. USE A NIOSH/MSHA APPROVED RESPIRATOR
WHEN FLAME CUTTING, WELDING, BRAZING & SANDING MATERIAL COATED
W/THIS PRODUCT.

Boiling Pt:B.P. Text:212-369F
Vapor Density:>1
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:70-72

Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:EXTREME HEAT, TEMPS >110F, FREEZING OR
OTHER SOURCES OF IGNITION.
Hazardous Decomposition Products:FUMES MAY CONTAIN CO, CO2, OXIDES OF
NITROGEN.

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE &
FEDERAL REGULATIONS. INCINERATE ONLY IN APPROVED FACILITY. DON'T
INCINERATE CLOSED CONTAINERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.